Why does my paslode not fire?

Possible causes for a Paslode nail gun not firing are: A nail jam is stopping the nails from moving forward. The gas fuel cell is empty, out-of-date or not attached properly. The nailer needs cleaned – especially if it has been used a lot without regular cleaning!

.

Thereof, do Paslode fuel cells go bad?

Paslode Cordless Red Fuel Cell pack. Paslode cordless fuel cells are marked with an expiration date on the bottom of the cell. For maximum performance use fuel before expiration date.

One may also ask, how long does a Paslode fuel cell last? about 27 months

Also to know is, why is my nail gun not working?

Check the Compressor The first port of call with any malfunctioning nail gun is the compressor. If you still cannot get your nail gun to work, then try removing the compressor, and emptying the air inside the device. Check for moisture, and examine the oil levels in the compressor motor.

What gas does paslode use?

The fuel is a mixture of 1-butene and propane. The fuel cells are designed to last for 2,000 rounds each, which makes them desirable for heavy duty projects where thousands of nails/staples are needed.

Related Question Answers

Why is my paslode charger flashing red and green?

A green light indicates power is on and charger circuit is ready. If battery is completely discharged, the red light and the green light may alternate back and forth for up to 20 minutes. This safety feature slowly recharges the battery until it is ready to accept the full charging current.

How many nails will a Paslode fuel cell shoot?

1,200 nails

Where are Paslode Nailers made?

Paslode's US capacity is complemented by a large and global ITW manufacturing base, with fastener plants in Australia, Denmark, Canada, Malaysia, Korea, and Shanghai. Paslode, a division of Illinois Tool Works, is a leading manufacturer of cordless and pneumatic nailers, staplers, and fasteners.

Will Paslode fuel cells work in Hitachi framing nailer?

As long as the Paslode cartridge box states that they are compatible with the Hitachi NT65GB nailer, they will work fine. If not, compare the cartridges - if they're the same size, they'll be fine. Make sure you keep and reuse the old Hitachi cartridge tops that came with the Hitachi cartridges.

Does paslode gas fit Hitachi?

Paslode Universal Trim Fuel is the fuel your finish nailer needs for just pennies per shot. Paslode trim fuel cells give you the power to drive up to 1,200 nails. And, the fuel works with most Hitachi and Bostitch Trim nailers.

What makes a nail gun misfire?

The nail gun will misfire if the piston is not regularly lubricated. Vibrations from firing the nails can loosen the screws surrounding the tip of the barrel and impair the nail gun's ability fire to fire a nail in a straight line. Unscrew the connector from the air hose line.

Why does my nail gun keep jamming?

Lack of Adequate Oil: The air cylinder in the nose needs plenty of oil to function properly. Too little oil, and the nails will be slow to feed, causing a jam. Pro Tip: For coil nailers, use 10-15 drops of oil before nailing. Misshapen Coil: A coil has to be round to feed properly.

How do you unjam a nail gun?

How to Unjam a Nail Gun Barrel

1. Step 1: Turn Off Power Source. Get started by making sure that you turn off the gun.
2. Step 2: Open Up. Open up the barrel and search for the release lever.
3. Step 3: Remove Stuck Nails.
4. Step 4: Organize and Refill.
5. Step 5: Close Up and Restore Power Source.

Why does my nail gun shoot two nails?

Double Kiss Many woodworkers have the problem of firing two nails when they pull the trigger a single time. This is called a Double Kiss. A double kiss is extremely dangerous since the second nail can strike the head of the first, and ricochet back and hit the user.

Can you use 16 gauge nails in a 18 gauge nailer?

Like 15-gauge nailers, most 16-gauge guns shoot nails up to 2-1/2 in. You'll pay about the same for a name-brand 16-gauge nailer as you would for a 15-gauge gun. 18-gauge brad nailer. If you plan to buy only one trim nailer, this is the size to get.

How much air pressure is needed for a nail gun?

Framing nail guns require the most air pressure because they typically use 3- to 3 1/2-inch nails that are driven into framing studs during the construction process of rough framing. Typical air pressures for this application range between 130 psi (pounds per square inch) and 100 psi.

How do you Unjam paslode?

How to unjam a nail gun:

1. Unscrew the two front nose bolts, or lift the nose latch, releasing the front nose plate.
2. Open the nose.
3. Clear the jam and push the driver blade back to its rest position.
4. Close the front nose and refix it.
5. Ensure the work contact element is free.
6. Reinsert the battery and the fuel cell.