At the broadcasting station, modulation is done to transmit the audio signal over larger distances to a receiver. When the modulated wave is picked up by the radio receiver, it is necessary to recover the audio signal from it. This process is accomplished in the radio receiver and is called demodulation..
Similarly one may ask, why do we need demodulation?
So we must separate the higher carrier frequency. As the extra signals are mixed with message signal , it must be filtered. In the channel, it is also possible to add some noise to the modulated wave which should be rejected. That is why demodulation is needed.
why digital modulation is required? Digital modulation is used to transfer a digital bit stream over an analog channel at a high frequency. This enables us to transmit signals generated in a digital circuit across a physical medium. This is because digital signals can be handled with higher security and digital systems are readily and widely available.
In this way, what is meant by modulation and demodulation?
Modulation is the process of encoding information in a transmitted signal, while demodulation is the process of extracting information from the transmitted signal.
What are the advantages of modulation?
Advantages of Modulation Antenna size gets reduced. No signal mixing occurs. Communication range increases. Multiplexing of signals occur.
Related Question Answers
How does demodulation work?
Demodulation is the process by which the original information bearing signal, i.e. the modulation is extracted from the incoming overall received signal. The process of demodulation for signals using amplitude modulation can be achieved in a number of different techniques, each of which has its own advantage.What is coherent demodulator?
Coherent demodulation is also called synchronous demodulation and it is suitable for all the demodulation of linear modulation signals. Coherent demodulation usually uses a multiplier to multiply the input a reference signal that is coherent with the carrier frequency and the carrier frequency.Why do we need a carrier signal?
So high frequency carrier frequencies are used in RADIO transmission because space is an insulator and one can have electric current in it to magnetise it only if the source contains a RATE OF CHANGE OF VOLTAGE or a varying electric field.What is demodulation or detection?
Advertisements. The process of extracting an original message signal from the modulated wave is known as detection or demodulation. The circuit, which demodulates the modulated wave is known as the demodulator.What do you mean by repeater?
In telecommunications, a repeater is an electronic device that receives a signal and retransmits it. Repeaters are used to extend transmissions so that the signal can cover longer distances or be received on the other side of an obstruction.What are the types of amplitude modulation?
Types of Amplitude modulation: - Double Sideband Suppressed Carrier(DSB SC)
- Double side-band full carrier (Traditional Amplitude Modulation)
- Quadrature Amplitude Modulation (QAM)
- Single sideband (SSB)
- Vestigial sideband (VSB)
Which device is used for modulation and demodulation?
A modulator is a device that performs modulation. A demodulator (sometimes detector or demod) is a device that performs demodulation, the inverse of modulation. A modem (from modulator–demodulator) can perform both operations.What is modulation and why is it important?
Modulation allows us to send a signal over a bandpass frequency range. If every signal gets its own frequency range, then we can transmit multiple signals simultaneously over a single channel, all using different frequency ranges. Another reason to modulate a signal is to allow the use of a smaller antenna.What is demodulation and its types?
Demodulation is extracting the original information-bearing signal from a carrier wave. There are many types of modulation so there are many types of demodulators. The signal output from a demodulator may represent sound (an analog audio signal), images (an analog video signal) or binary data (a digital signal).What is meant by the term modulation?
Definition of modulation. 1 : an inflection of the tone or pitch of the voice specifically : the use of stress or pitch to convey meaning. 2 : a regulating according to measure or proportion : tempering. 3 : a change from one musical key to another by modulating.What type of modulation is used in cell phones?
GSM cell phones widely use a popular combination, Gaussian filtered MSK (GMSK), which allows a data rate of 270 kbits/s in a 200-kHz channel. A very popular digital modulation scheme, binary phase shift keying (BPSK), shifts the carrier sine wave 180° for each change in binary state (Fig. 2).What is modulation in biology?
1. To regulate or adjust to a certain degree: physiological mechanisms that modulate the body's metabolic rate. 2. Biochemistry To act on (a receptor, for example) as an activator, an inhibitor, or both. mod′u·la·bil′i·ty n.What is the importance of modulation index?
significance of modulation index. It is used to determine the strength and quality of transmitted signal. If the modulation index is small, then the amount of variation in the carrier amplitude is small.What is modulation provide two examples of how it can be used?
Provide two examples of how it can be used. Modulation is technology used to modify analog signals to make them suitable to carry data over a communication path. For example, FM (Frequency Modulation) radio - the frequency of the carrier signal is modified by the application of the data signal.What are the modulation techniques?
Modulation techniques are roughly divided into four types: Analog modulation, Digital modulation, Pulse modulation , and Spread spectrum method. Analog modulation is typically used for AM, FM radio, and short-wave broadcasting. Digital modulation involves transmission of binary signals (0 and 1).What is modulation in speech?
Modulation is when you control or adjust something, like when you lower your voice to a loud whisper in order to make what you're saying more dramatic and mysterious. The noun modulation has several meanings, including a change of key in music or of the sound of a person's voice.How many types of modulation are there?
3
What are the factors affecting digital modulation?
Two main factors influencing the choice of a digital modulation scheme are spectral efficiency (minimum bandwidth occupancy) and power efficiency(minimum required transmitted power). Other requirements are: minimum out-of band radiation. robustness to channel impairments.Which modulation technique is better?
FSK modulation (Frequency Shift Key) is commonly believed to perform better in the presence of interfering signals. In BPSK modulation digital data of 1 and 0 is represented by 180 degree phase change. In QPSK by phase shift of 90 degree, here 2 bits are mapped on each signal. 
