Brick ledge is a reinforced concrete bearing which supports the weight (100Kg per square meter or more) of finished materials such as brick, stone or other veneers acting directly on a footing or other foundation element. Generally, the brick or stone veneer is placed on the exterior of a house or building..
Keeping this in view, what is the purpose of a brick ledge?
The main purpose of the brick ledge is to help by providing a place for the moisture to settle without affected the wood framing components behind it. There are various “flashing” materials used to cover the sill plate, and other framing members, to also help protect against moisture damage to them.
Also Know, what is a brick lug? Definition of lug brick. : paving brick having lugs on one side and one end to control the space between adjacent bricks when laid in a pavement.
Subsequently, question is, how deep is a brick ledge?
Common trench depth of 15.24cm and width of 30.48cm is used. Place grade at the bottom of the trench and level it properly.
How do you make a brick ledge?
Dig a trench beside the structure to which the brick ledge will be attached; normally, that would be a concrete slab or foundation. Dig the trench 6 inches deep and 12 inches wide. Place a 4-foot level in the bottom of the trench to check the grade. Level the trench by removing more soil if necessary.
Related Question Answers
How far can a brick overhang the slab?
Three-inch brick veneer should not overhang the foundation by more than 1 inch, and 3 5/8-inch brick veneer by not more than 1 1/4 inches.Can you add a brick ledge to an existing foundation?
When adding anchored brick veneer, its weight may be supported directly on either existing or new concrete foundations. Alternatively, where existing concrete or masonry foundation walls provide sufficient strength, the veneer may be supported by steel angles anchored to the existing foundation walls.What is brick veneer exterior?
Brick veneer is actually a single layer of full-sized bricks installed adjacent to a home's exterior wall. The inner wall bears the weight of the structure and not the brick. In this instance, the brick serves as a decorative element only.Do you need a brick ledge for stone veneer?
Yes, you can install stone veneer over brick. But it is not as easy as troweling mortar onto the brick and applying veneer. As with other surfaces, the brick must provide a stable surface for the veneer layer. At the least, you will need to apply a wet scratch coat to the brick before you install the veneer.What is a lug footing?
monolithic slab (also referred to as a thickened- or lug-footing slab), where the thickened and reinforced edge of the slab provides sufficient. bearing (foundation "footing") for the slab edge and wall loads above. Or, do you have a stem-wall supported slab. 
