What coils does the Aspire Nautilus use?

The Aspire Nautilus AIO atomizer is the famous and popular Nautilus BVC coil, it also uses nichrome wire. The Aspire Nautilus AIO comes supplied with two coils both rated at 1.8 ohms, one for regular e-liquid and one for use with nicotine salts, though it works equally well with normal e-liquid.

.

Subsequently, one may also ask, what coils fit Aspire Nautilus?

BVC | Nautilus | Nautilus Mini Coil

• 1.8 Ohm Coil: BVC design (bottom vertical coil) 1.8ohm resistance. 6-10W recommended use. Kanthal wire. Organic cotton.
• 0.7 Ohm Coil: 0.7 Ohm Resistance. 18-23W Recommended Use. Kanthal Wire. Designed to fit the Nautilus 2 Tank by Aspire.

Also Know, what are Nautilus coils? The Aspire Nautilus BVC Cotton Coils use Organic Cotton and feature new larger wicking holes. They are designed to provide the purest and cleanest flavor from all eLiquids.

Similarly, you may ask, how long do aspire Nautilus coils last?

about 10 days

What is the difference between 1.6 and 1.8 ohm coils?

Normally the lower resistance the coil, the more intense the vape should be, but the 1.6 uses less recommended watts/volts then the 1.8, so even though they are close, i'm a bit confused about the 1.6 intended vape.

Related Question Answers

What tanks use aspire BVC coils?

You can use the Aspire BVC heads in some Davide tanks and Pro tanks with Davide adaptors. The BV Kilo lite takes the BVC's also but I can't recommend the tank. You might get more use out of the Atlantis heads to offset the cost, but I have not seen the 1.5 ohm in a while.

What coils fit aspire k2?

Click here to be taken to the Aspire Nautilus BVC coils.

• 5-pack of replaceable coils.
• Compatible with the Aspire BDC Clearomizer pack.
• Choice of 1.8ohm or 2.1ohm resistance.
• Coils are designed to be used with the Aspire CE5, K1 and K2 ranges of clearomizers, and the 1.8ohm variant can be used with the Spryte.

What's a BVC coil?

You may also start to see the acronym BVC which stands for bottom vertical coil meaning that the coil is built vertically instead of horizontally. BVC was made very common from Aspire first with the Nautilus tank and then with their regular tanks.

What coils fit aspire Atlantis?

Aspire Atlantis Replacement Coils

• Aspire Triton Clapton Coil Head 5-Pack (0.5 ohm)
• Aspire Atlantis V2 Organic Cotton Coils - *SUB OHM* - 0.5ohms - 5 Pack.
• Aspire Triton Kanthal Replacement Coils 5 Pack - 1.8ohms.
• Aspire Triton Ni200 Coil Head 5-Pack (0.15 ohm) (subohm)
• Aspire Triton Replacement Coils 5 Pack - 0.3ohm (subohm)

What coil does the Nautilus Mini use?

The Nautilus Mini is the next generation of tank systems. Made of stainless steel and Pyrex glass, the Nautilus Mini uses the Aspire “BVC” (Bottom Vertical Coil) atomizer technology. This new technology is designed to last longer while still giving users the purest and cleanest taste from e-liquids.

Can you use different coils in different tanks?

If your tank uses the coil in a category, you can usually use any other coil in that category. i.e. SMOK Baby Beast uses TFV8 Baby coils, therefore it is compatible with any other coil in the "small" category.

What coil does the Aspire k3 use?

The K3 Tank uses Aspire Nautilus BVC coils which give a longer atomizer life and fuller flavours. With a mouth to lung style of vaping but a sub-ohm tank design, with wider airflow allowing a better draw for fuller flavour and vapour production. The K3 Glassomizer has a simple bottom-fill mechanism.

Why does my vape taste burnt even with a new coil?

It tastes burnt because the wick inside your atomizer coil has dried out and burned up when it was heated. The wick is the part of your vaporizer that soaks up the eliquid from the tank. If the wick is not fully saturated with eliquid when you take a puff, this material can char and leave a foul taste in your mouth.

Can you fix a burnt vape coil?

If you find yourself with a burnt coil, then one of the first things you can do before giving up and ordering a new one is simply to remove the element and put it in a small bowl of warm water. This will loosen up any e-juice that's become stuck to it. After a few minutes, pour out the warm water and add cold water.

Can you wash aspire coils?

You can also clean the atomizer coils for your Aspire tank by swishing them in warm water or vodka. Cleaning a coil removes some of the crust and can prolong the coil's life. It will not, however, fully restore the coil's original flavor. After cleaning an atomizer coil, allow it to dry for about 24 hours.

What wattage should I vape at?

Some people start at 10 watts while others vape at over 100 watts. Typically, anything over 50 watts could be considered advanced use, though beginner equipment capable of running high power is becoming more and more common.

Can you clean and reuse vape coils?

Soak the coil overnight in a bowl of high-grade alcohol (better than drug-store isopropyl). Rinse the coil thoroughly in running warm water. Blow into the open end to force water through the wick and out through the juice intake holes. Roll the coil in a paper towel and let it dry for a day or two.

How many puffs do you get from a coil?

I get on average about three to four thousand puffs on every coil that I drop in. It's weird because I have seen that people only get a thousand before they start to burn. The flavor starts to fade after about two thousand, but I have not had a coil start to burn on me until about four to five thousand puffs.

Can I rinse my vape coil with water?

Rinse the coil under hot running water: Hot water will wash away any leftover debris or half-heated liquid that was sticking to the sides. Shake out the water: Gently shake out any water that is sitting between the coil wraps and then let your coils air dry on top of a paper towel or other absorbent material.

Why does my vape pop?

The popping generally happens when the e-juice hits the hot coils and creates the vapor that you inhale. Thinner liquids are going to be more likely to flood the atomizer, which can also cause more pronounced popping and spitting noises. Thicker e-liquids tend to be more popular anyways because they create more vapor.

How do you clean a burnt coil?

Rebuildable coils

1. Remove wicks from coils.
2. Dry burn your coils lightly (don't let them glow too much)
3. Remove atomizer from your mod.
4. Place under running water.
5. Brush them lightly with a toothbrush or a coil cleaning tool.
6. Rinse once again.
7. End with a final dry burn to remove the last droplets of water.

How do you fill a Nautilus 2 tank?

Nautilus 2S Filling Refilling the child resistant Nautilus 2S tank is simplicity itself and mess free. Unscrew the top cap anti-clockwise a few turns, Place your thumb on the top cap above the indicator spot and push away from you, this will reveal the filling slot.

Is the Aspire Nautilus?

The Nautilus clone made by Aspire is a revolutionary tank that uses the Aspire bottom dual coil atomizer concept and is constructed of stainless steel and Pyrex glass, The Nautilus has an adjustable airflow feature, which allows you to adjust air flow to four different levels.