What can I use instead of curtain rods?

To put together the DIY curtain rod featured here you need two wood brackets, a long wood dowel, a saw, a drill, sandpaper, wood stain, warm gray chalk paint, dark wax and dowel caps (these are optional). If you prefer something sturdier than wood you could use a metal rod instead of a dowel.

.

Also question is, how do you hang curtains without a rod?

Alternative Ways to Hang Your Curtains Without Drilling

1. Coat Hooks. Coat hooks are a surprisingly versatile tool.
2. Kwik-Hang Curtain Rod Brackets. There are two major obstacles to hanging curtains: accurately measuring them and damaging your walls.
3. Command Hooks. Ah, Command Hooks.
4. Tension Rod Curtains.

Additionally, can Command hooks hold a curtain rod? They can be merely decorative, or they can serve to block out the light. Many landlords don't allow renters to drill holes into walls, which is necessary for installing curtain rod hooks. Fortunately, it is still possible to install curtain rods with Command hooks.

Additionally, can you hang up curtains without drilling holes?

Fortunately, there are a few easy ways to hang curtains without having to drill holes in your walls. You can use adhesive hooks or a tension rod to hang up curtains without a drill.

Do you need sheers with curtains?

Like with curtains, you want your sheers to have a bit of a wave to them. With the height, if used in conjunction with a floor length curtain, you can either have the sheer the same length (or just an inch shorter) or only have the sheers hang down to the sill.

Related Question Answers

How do you hang curtains for a rental?

Here are a few of our favorites:

1. Hang Curtains With Command Hooks. If you have lightweight curtains, Command Hooks can be a perfect solution for you.
2. Source.
3. Use Tension Curtain Rods.
4. Get Twist & Fit Curtain Rods.
5. Buy Simple Fit Shades.
6. Try Kwik-Hang Curtain Rod Brackets.

Can I hang a curtain rod from the ceiling?

Hanging a curtain rod from the ceiling doesn't have to be hard. If you're installing ceiling curtain rods, you'll need a power drill. Use the power drill to install anchors. Anchors are important for heavier rods, as they will be used to keep the brackets in place.

Can you use a tension rod to hang curtains?

Tension rods work well when you need to hang a curtain at a window that won't accommodate installing a standard rod. However, you can also use them to hang sheers inside the window frame underneath curtains. You can hang just about any type of curtain on a tension rod.

Are sheer curtains outdated?

Sheers - Layers of sheers, drapes, and blinds can make windows look outdated. Blinds and Shades - Shades are necessary when you need to block out sunlight, but some rooms need all the light they can get!

What are the different ways to hang curtains?

Unique Ways to Hang Your Curtains

1. Make Your Own Curtain Hardware. These ideas are just a start.
2. Coat Hooks. Brass or metal coat hooks can be attached above your window to hold curtain panels.
3. Glass or Brass Door Knobs. Scour antique shops or thrift stores for old doorknobs (it doesn't matter if they are mismatched!).
4. Spoons.
5. Cup Hooks.
6. Belts.
7. Clothespins.

How do I make long curtain rods?

Buy a central bracket -- the bracket that will support and connect the middle of your rod to the wall or ceiling -- one size bigger than your rod thickness to accommodate the extra bulk of the connector. Hang the extra-long curtain rod higher and wider than the window to give the window a longer, wider appearance.

How do you make a single curtain rod into a double?

How to Convert a Single Curtain Rod to a Double

1. Purchase a curtain rod conversion kit.
2. Remove the existing curtain and curtain rod from the bracket.
3. Carefully remove the existing brackets and hardware.
4. Attach the hardware and brackets from the curtain kit to the wall, using a level to ensure that the curtain rod will be even when installed.

What size curtain rod do I need?

Steps

• Choose a curtain rod with a diameter of at least 1 inch (2.5 cm). Thin curtain rods tend to look cheap and can bow under the weight of your drapes if they are heavy.
• Measure 3–6 inches (7.6–15.2 cm) beyond the window frame for rod length.
• Select a rod with support brackets at least every 50 inches (130 cm).

What is a finials for curtain rods?

Drapery Rod Finials Come In All Shapes And Sizes The decorative piece that attaches to the end of a curtain rod or drapery pole is called a finial. Typically, they are the drapery hardware component that first attracts your attention when deciding which style or collection you want for your curtains.

How do you hide curtain rings?

HERE'S THE QUICK TIP ON HOW TO HIDE CURTAIN RING CLIPS: just pinch the back of the curtains and clip the rings an inch or so down from the top. You can do this before you hang the curtain and then slide the rings onto the rod, or hang the rings on the rod and then clip the curtains up.

How long do curtain rods come?

Figure about 20 minutes per window for a basic rod with brackets, and 45 minutes per window for a track rod. If you would rather do it yourself, hanging ready-made curtains is not that difficult. Rods usually come with mounting hardware and instructions.

What is the longest curtain rod available?

Rods measures 1.25 inches in diameter. Curtain rods projects 3.5 to 5.5 inches from the wall. Adjusts from 144 inches to 240 inches long. Available in White, Gold, Metallic Gold, Ant.

How do you make a curtain rod out of a pipe?

DIY Curtain Rods Tutorial

1. Pipe Supplies.
2. Tools Required.
3. Step 1 – Remove Grease From the Pipe.
4. Step 2 – Prime the Pipe for Spray Paint.
5. Step 3 – Paint the Pipe.
6. Step 4 – Assemble the Pipe Curtain Rod.
7. Step 5 – Attach the Pipe Flanges to the Wall.
8. Step 6 – Attach the Pipe Curtain Rod.

How do you make a curtain ring slide?

Defeat those balky curtain rings by smoothing the surface of the rod and providing a slick pathway for them to glide across. Use the right size rings for your curtain rods. Rings that are too small will never slide easily across the rod. Increase the size of the rings, or use a rod with a narrower diameter.

How do you make a wooden curtain rod?

How to make Restoration Hardware inspired wooden curtain rods:

1. step 1: measure to drill your hole.
2. step 2: using your hole saw, cut out a semicircle from each bracket.
3. step 3: sand any rough edges from the cut.
4. step 4: beat up your brackets.
5. step 5: stain your brackets.