A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can't pull the drive links out of the bar nose.
.
Besides, can you over tighten a chainsaw chain?
There is a tension screw located near the base of the bar on the chainsaw. To tighten the chain, turn it clockwise, and to loosen turn it counterclockwise. Don't over-tighten the chain as this could cause it to break. The video below from Echo demonstrates the proper way to adjust a chain tension.
Additionally, how many times can I sharpen a chainsaw chain? Depending on usage, a chain can usually be sharpened 3 to 5 times max.
Subsequently, question is, why does the chain on my chainsaw keep coming loose?
A damaged bar or chain may cause the chain to come loose from the bar and can be very dangerous when operating the machine. It is important to ensure that the chain fits snugly inside of the bar and that the teeth that keep it from running off of the bar are not worn down too low.
How do I know if my chainsaw chain is worn out?
Here are some of the warning signs that will tell you that the chain is worn out and need to be sharpened or replaced.
- Inefficient cutting performance. When a chainsaw chain is sharp, it cuts through anytime easily and without any efforts.
- Difficult positioning.
- If you notice smoke.
- Damaged chain teeth.
How long should a chain last on a chainsaw?
A chainsaw chain can last for 5+ years with frequent use. For occasional users, a chain could last for decades. The life expectancy of a chainsaw chain is determined by it's use and maintenance, not by a pre-determined timeline or expiration date.Is it OK to use a chainsaw on wet wood?
Cutting Wet Wood with a Chainsaw. Winter is rapidly approaching, and with it, wet conditions. Cutting wood in rain or snow is okay for your saw: If you're nervous about your saw getting wet, don't worry. Gas powered chainsaws are perfectly okay to use in wet weather; the same is true for the log itself.Why does my chain keep popping off?
If your chain comes off at the rear If your chain is coming off at the rear, it's often a simple matter of adjusting the limit screws on your rear derailleur. If the chain is coming off the inside of the cassette, put the chain onto the smaller chainring (at the front) and the largest sprocket (at the rear).When should I replace chainsaw chain?
When to Replace a Chainsaw Chain- Teeth are broken or worn unevenly.
- Issues with Chain Tension.
- Smoke is present when cutting.
- Sawdust, rather than coarse chips are left behind.
- Chainsaw feels unbalanced, cuts unevenly, or rattles when in use.
