about 87 inches
.
Also question is, how high should the top shelf be in a closet?
The very top shelf in the closet is commonly 84 inches above the floor level. This allows a double-deck arrangement of closet rods below this shelf. One rod is mounted just below the top shelf and the other rod is mounted 42 inches above the floor. At 7 feet high, the top shelf is a stretch for many people.
Additionally, how much space should be between closet rod and shelf? Measure for the distance away from the wall. A minimum of 10 inches is best, but it'll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice.
Herein, how deep should a closet shelf be?
A clothes closet should have a minimum depth of at least 24 inches deep, so the clothes can clear the back wall. Shelves for women's shoes should be spaced about 6 to 7 inches apart. Shelves for folded clothes should be placed around 12 inches apart.
How far away from the wall should a closet rod be?
A common convention is 12" from the back wall to the center of the rod. People typically put the closet rods in the middle of the closet. Minimum closet depth is 24" so that puts the closet rod at 12" too. Certain types of clothing tend to extend past the edge of the hanger.
Related Question AnswersWhat is the average shelf height?
Shelf Design Guidelines The highest shelf in a bookcase should be as high as an average-sized person can comfortably reach - about 72 to 78 inches. If the shelves will be accessed from a sitting position, the highest shelf should be no more than 60 inches above the floor.How long can closet rods go without support?
Closet Rod is available in custom lengths up to 96 inches. A center support is required for beams longer than 48 inches. Additional supports are recommended if the closet rod will be supporting especially heavy apparel (i.e. winter coats, heavy weight suits, etc.).How thick should closet shelves be?
The minimum thickness you need for shelves is 1/2 inch, but if you plan to load them with heavy items, use 3/4-inch plywood.How deep should a closet be for hanging clothes?
The standard minimum depth for a reach-in closet is 24 inches, but a closet intended to store coats or other bulky hanging items may need to be as deep as 28 inches. A closet less than 22 inches deep isn't deep enough to allow hanging clothes.How wide does a closet need to be to hang clothes on both sides?
It's for this reason that a closet must be 6 feet wide to allow for hanging areas on both side walls; a narrower closet would not have 2 feet of clear space between the two hanging sections.How do I double out my closet space?
Steps- Make double hangers. If you have a tab from a soda can, you can easily double up on all your hangers.
- Use upside down shelf brackets on bare walls.
- Invest in an over-the-door rack.
- Store a plastic or wooden set of drawers in your closet.
- Install double rods for short hanging clothes.
Where should closet rods be placed?
As a rule, place the top rod 80 to 82-inches up from the floor and the bottom rod about 40-inches up from the floor. For a single rod application, plan 60-inches from the floor for placement. You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging.What is the best material for closet shelves?
The Best Material to Use for Closet Shelves That Will Not Bend or Warp- Solid Wood. Unless you're putting extremely heavy things on your closet shelves, solid wood should be adequate for the task.
- Plywood. Plywood is a very strong material that is resistant to both sagging and warping.
- MDF.
How do I maximize my closet space?
10 Ways to Squeeze a Little Extra Storage Out of a Small Closet- Double your available hanging space by adding an extender rod.
- Store clothes on shelves more efficiently with shelf dividers.
- Double your shelf space with under shelf baskets.
- Hooks are your very best friend.
What is a good size master closet?
Layout and Space Requirements A walk-in master closet should be a minimum of 7-by-10 feet, and preferably 100 sq. ft. for two users. That gives you space to line two or three walls with shelves, cubbies, and poles, and the elbow room to reach them easily.How much weight can a closet shelf hold?
600 lbWhat is the standard depth of a wardrobe?
Most wardrobe cabinets typically are 24 inches deep, but can be as narrow as 18 or even 12 inches in depth. Height also depends on application, but standard height is usually no more than 72 inches. Width varies anywhere from between 24 inches to more than 96 inches.How do you build closet shelves?
- Measure the Closet Space. Measure the back wall and two side walls of your closet space to determine the length of the shelf supports.
- Measure Pieces for Closet Organizer.
- Cut Shelf Supports.
- Cut the Shelves.
- Attach Shelf Support to Wall.
- Assemble the Central Unit.
- Position the Central Unit in the Closet.
- Install Long Shelves.
