- Measure up. Measure the width of your chimneybreast.
- Start in the middle of the chimney breast. Cut a lengthto go above the shelf.
- Score and trim the excess.
- Paper the sides of the chimney breast.
- Remove any excess paper from the sides.
- Finish the job.
.
Just so, can you put wallpaper around a fireplace?
Flank the fireplace. Consider your fireplace the art in the room andcover the walls on each side with wallpaper. And it'sanother way to cut wallpaper costs, since you need toput the paper only on that single fireplace-centricwall. Then you can give the other walls a (less expensive)coat of paint.
do you have to overlap wallpaper? No, we do not recommend overlapping yourwallpaper seams. Seams should be "butted" tightlytogether and smoothed down with a wallpaper seam smoother.Properly "booked" wallpaper does not shrink on the wall, soyou do not need to overlap.
Also Know, where is the best place to start wallpapering?
Wallpapering Tips Where ToStart Choose your joining corner according to whether it isthe most inconspicuous in the room. For example, in a room that issquare, the corner that is behind where the door opens is agood option, and where there is a chimney breast theinternal corner next to it is ideal.
How do you cut wallpaper?
The cuts should always be at a right angle to theroll. Either use a wallpaper ruler or fold thewallpaper at the marked point "edge on edge", and cutit with your wallpapering knife or scissors. For plain-colouredwallpapers, the cutting process for the first lengthis identical.
Related Question AnswersHow do you wallpaper a curved archway?
Wallpapering an Archway- Hang wallpaper above archway. Above the archway hang your wallpaper as you normally would on any other wall.
- Trim wallpaper. Trim the excess wallpaper away from thearch.
- Make some notches.
- Seal notches.
- Repeat.
- Measure arch.
- Cut and hang two long strips.
- Cleanup as normal.
How do you paper around an arch?
Wrap the paper along the edge of the archand down the jamb, smoothing out any wrinkles and bubbles as yougo. Trim the paper on the archway with utility shearsto within an inch of the edge. Cut small wedge shapes that extend1/4 inch from the edge.How do you use a plumb line?
How to Use A Plumb Bob- Measure two to three few inches away from the top of the wall,and make a mark.
- Set a nail in the mark.
- Hang the plumb bob on the nail, letting gravity draw a verticalreference line for you.
- When the plumb bob is done oscillating, measure the distancefrom the wall.