How do you reset a Master Lock directional lock?

Category: "Set-Your-Own" Combination Locks Instructions

1. Open lock with the factory set or previously set combination.
2. Insert reset tool (enclosed in package) in hole on side of lock.
3. Push reset tool in and turn 90 degrees (in either direction).
4. Set wheels to desired combination.
5. Turn and remove reset tool.

.

Then, how do I reset my Master Lock 1500iD?

How to Open a Master Lock 1500iD Speed Dial:

1. Find the dashed lines at the bottom of the platform.
2. Take an exact-o knife and cut through the plastic.
3. Take out the instructions out carefully.
4. Push the shackle in 2x.
5. Use the directional arrows to put in your combination.
6. Pull up on the shackle and it should open.

Also Know, how do you reset a 4 digit Master Lock? This lock is preset at the factory to operate at 0-0-0-0.

1. With dials at 0-0-0-0, pull out the shackle.
2. Turn shackle 90 degree (1/4 turn) so notch on shackle is aligned with notch in lock body.
3. Press and hold the shackle down.
4. Set the dials to your own combination by lining up middle of numbers with red stripe.

Similarly one may ask, how do you open a master lock without the combination?

Please follow the steps outlined below:

1. Turn the dial 3 times to the right and stop on the first number of the sequence.
2. Turn the dial to the left, pass the first number of the sequence and stop on the second number.
3. Turn the dial to the right and stop on the third number of the sequence.
4. Pull up on the shackle.

How do you open a 4 combination lock?

How to Open a Four Number Combination Lock

1. Find your combination.
2. Go to the first number.
3. Set the second dial on the lock to the second number in the combination.
4. Use the third wheel to find the third number in the combination.
5. Locate the fourth number in the combination on the bottom wheel on the lock and center it.

Related Question Answers

What do you do when your Master Lock won't open?

Please try resetting the lock again by following the instructions below:

1. Place lock in the open position.
2. On the back of the lock, slide the reset lever into the “up” position.
3. Insert the shackle into the lock and squeeze firmly twice to “clear” it.
4. Pull up on the shackle to open the lock.
5. Enter your new combination.

How do you reset a 3 digit Master Lock?

Steps

1. Open the lock using the old combination.
2. Insert the reset tool into the shackle hole.
3. Turn the reset tool so that the Master logo is facing you.
4. Rotate the dial clockwise 3 times to clear the old combination.
5. Enter your new combination.
6. Remove the reset tool to lock it.
7. Write down the combination in a safe place.

How do you pick a Master Lock?

Insert the pointed end of the pick into the lock and hold the handle end in your free hand. Push the pin at the back of the lock up with your pick. Master padlocks have a series of pins that all need to be raised above the cylinder so the cylinder can rotate and unlock the lock.

How do I open my Master Lock?

Standard Instructions for Opening a Combination Lock

1. Turn right three times. Stop at First Digit.
2. Turn left one full turn passing 1st number and stop at Second Digit.
3. Turn right and stop at Third Digit. Pull shackle. Profit.

Can you reset a lock combination?

Take these steps to reset your lock: Pull up the shackle to open the lock. Rotate the shackle 90° counterclockwise and press all the way down. Hold down the shackle and set your own combination by turning dials.

What is a directional lock?

The 1500iD Speed Dial is the world's first combination lock that opens on up/down/left/right directional movements. This lock features a 2-1/8 in. (54 mm) wide metal body that can be opened one-handed without looking for ease of use.

How do you change the combination on a locker lock?

How to Set a Combination Lock

1. Pull up the shackle to unlock.
2. Rotate the shackle 90 degrees counterclockwise and press down.
3. Hold down and continue to turn the counterclockwise another 90 degrees.
4. Set your own combination by turning the dials.
5. Turn the shackle back as normal then the setting is complete.

How does a dial lock work?

The typical combination lock has a combination dial that is attached to a spindle. Inside the lock, the spindle runs through several wheels and a drive cam. The number of wheels in a wheel pack is determined by how many numbers are in the combination - one wheel for each number.

How do you open a combination lock if you forgot the code?

To open combination locks without a code, start by pulling up on the dial and turning it clockwise until you hear the lock click. Then, check what number you're at, add 5 to that number, and write it down. Next, set the dial to that number and turn it counterclockwise until you hear it click again.

How do I reset my Master Lock 5400d?

Master Lock 5400D Instructions

1. Slide down the shutter door on your Master Lock 5400D portable key safe and roll the dials to "0000" – the factory default combination.
2. Push the release button for the key storage compartment door.
3. Move the combination reset lever, located near the hinge at the right corner of the door, left and down.

How do you open a combination lock with 3 numbers?

Method 2 Opening the Combination Lock

1. Turn the dial on the lock clockwise three times. Turn the dial to the right.
2. Stop turning when the marker points to the first number of the combination.
3. Turn the dial back to the left for one full turn.
4. Turn the dial to the right.
5. Open the lock.

How do you pick a combination lock with a paperclip?

To pick a lock using a paperclip, start by unfolding one paperclip so it's straight with a hook at the end and a second paperclip so it's bent at a 90-degree angle. Then, insert the bent end of the second paperclip into the lock and turn it in the direction the lock turns.