Donning gloves and a respirator, fill a paint tray with primer and load a wall brush or paint roller with a thick nap cover. When painting textured walls—or any walls, really—apply a coat of primer to the wall in “W” shaped strokes for maximum coverage, starting with the top left corner and moving down..
Likewise, can you paint on textured drywall?
The secret to repainting textured drywall is in your tools. Trying to get the paint to stay in the crevices of textured drywall is difficult enough, and if you aren't using the best tools for the job, you are making it harder than it needs to be. Ditch the low-nap covers used on smoother walls.
Subsequently, question is, what kind of roller should I use to paint textured walls? Ceilings and Drywall - Medium 3/8″ nap roller covers work best. Walls, Wood, and Metal - Small 1/4″ nap roller covers or foam rollers will produce the smoothest finish. Light to Medium Textured Surfaces - Microfiber rollers are best. Smooth Surfaces - Use a white woven short nap roller for an ultra fine finish.
what is the best paint finish for textured walls?
Flat finish is also known as matte finish and has the least amount of shine. Because it doesn't reflect light, it's the best choice to hide any imperfections like bumps or small cracks on walls. It also goes on smoother over rough surfaces, so it's a good option for textured walls.
Why is my wall patchy after painting?
Patchiness can happen if you don't apply enough coats of paint. If you don't have enough paint on your roller, it can leave behind patchy areas. Likewise, too much paint on the edges of your roller can cause thicker areas that make the wall seem patchy.
Related Question Answers
Is there a textured paint for walls?
Smooth texture paint has a heavy-bodied finish and can be used on walls and ceilings. Texture additives may be mixed into most oil-based and latex paints. Spray texture paint is economical and makes applying texture to ceilings much easier. Touch up spray is available for repairing acoustic or popcorn ceilings.Do I need to sand textured walls before painting?
It is all but impossible to sand the texture off thru latex paint. If you want to get rid of the texture you need to skim coat the walls with joint compound, then sand smooth and prime. Generally primer isn't needed for repainting walls, the exceptions are - repairs, stains and possible adhesion issues.Do you have to prime texture before painting?
Although it is recommended to prime the texture before you paint it, it is not always particularly needed. Keep in mind that while it's not necessary, the textured surface you are painting is already uneven, so priming would only help to ensure an even appearance to the coat of paint.Can I paint over textured paint?
Painting over textured paint can be difficult, especially when the paint is rough and peaky, like the top of an iced cake. To properly paint over this type of surface, you will need twice as much paint as normal, and you will need the proper tools to get into the wall's peaks and troughs.Do you sand after textured walls?
Choose a sandpaper that is 120 to 150 grit to ensure surface abrasion without damaging the drywall. If warm water removed most of the texture, a light sanding will likely smooth the wall surface. For plaster walls, it can take heavy continual sanding to remove the textured paint.How do you make a textured wall look good?
Apply joint compound over repaired areas and match the texture to existing walls. Let the compound dry and then sand lightly, feathering in the edges as you go. Verify that paint matches existing colors by applying it on the wall behind a door before repainting repaired spots.Do you prime drywall before you texture?
You could prime before texture if you want, but it is an unnecessary step when the fresh bare drywall is the perfect surface to accept texture as it is. Just brush the surfaces down with your hand or a dust brush beforehand so as to remove as much of the surface dust as possible.How do you prevent orange peel when painting a wall with a roller?
Rollers leave a texture or stipple effect that looks like a orange peel. That said by using a small nap roller like 3/8" or smaller will make the stipple smaller. And by adding a product such as Flotrol or BIM extender it will also help to limit the effect.Should you prime after texturing?
If the finish paint is going to be flat you do not need to prime the texture but if you are going to use a eggshell/satin you will need to prime after texturing.What are the 4 types of texture?
The texture stimulates two different senses: sight and touch. There are four types of texture in art: actual, simulated, abstract, and invented texture.What color paint hides imperfections?
Eggshell paint is slightly reflective. It shows more imperfections than flat paint, but not as many as glossier finishes. Satin paint is similar to eggshell, but it stands up well to moisture and is the best choice for hiding problems in a heavily used area.Why are walls textured?
Wall textures are commonly used to finish interior wall surfaces and hide taped drywall seams along with other imperfections. It is a great alternative to a smooth finish because it is subtle but easily hides wall and ceiling imperfections. 
