How do you lift a shower drain cover?

Hold the stopper body in place and unscrew the top knob (counterclockwise) with pliers and a rag or rubber grippy to prevent scratching. Unscrew the brass insert beneath with a flathead, then lift the stopper. From the open position, lift and look for a set screw. If no screw, simply turn counterclockwise to remove.

.

Likewise, people ask, how do you remove a bathtub drain cover without screws?

Drain Cover Without Screws

1. First, you need to spray some lubricant along the drain cover's lip.
2. Next, insert a pair of needle-nose pliers into an opening on the drain cover.
3. With firmness, hold the pliers securely with both hands - one hand per grip and then twist to the left.

Also Know, can't get shower drain cover off? It is a little more difficult to remove but can be done quickly by following these steps.

1. Spray some spray lubricant along the lip of the drain cover.
2. Insert the ends of a pair of needle-nose pliers into any of the openings on the drain cover.
3. Hold a pliers firmly with one hand per grip and twist to the left.

Beside above, what are the different types of shower drains?

There are more shower drains available than you can count, but they all really fall into two types – point drains and linear drains. Point drains are most common and are what we are used to seeing in showers.

How do you remove a pop up shower drain cover?

Remove the knob on the top of the stopper. Hold the body of the stopper in place with one hand and with the other hand unscrew the knob by turning it counter-clockwise. If the knob will not unscrew, then wrap the rag around the knob and use the pliers to help remove the knob.

Related Question Answers

How do I get hair out of my shower drain?

How to Unclog a Shower Drain Using Baking Soda and Vinegar

1. Pour a cup of baking soda down the drain.
2. Wait for a few minutes.
3. Pour a cup of vinegar down the drain too.
4. Wait for a couple of hours to see if the hair clog gets dissolved.
5. Clean out the drain by pouring boiling water down it.

How do you remove a shower drain grate?

How to Remove a Shower Drain Grate

1. Put on a pair of work gloves.
2. Analyze the drain cover to see if it is kept in place by a screw.
3. Remove the screw if there is one.
4. Insert a screwdriver between the holes in the grate and slowly lift the grate from the shower drain.

How do you remove a drain from a bathtub?

Steps

1. Unscrew a foot plug drain's stopper. Put on your rubber gloves and grasp the center stopper.
2. Pop out a lift-and-turn drain's stopper. Grasp the stopper and pull up on it.
3. Remove the faceplate of a trip lever drain. Set your tub to the “open” position, if it has a visible stopper.

How do you clean a shower drain trap?

1. Fill a mixing jug with 1/2 cup baking soda, then tip the soda into the shower drain.
2. Pour 1/2 cup of vinegar into the shower drain immediately after the baking soda.
3. Cover the drain hole with a stopper or a plate and allow the baking soda and vinegar to sit in the P-trap for 30 to 60 minutes.

How do you fix a bathtub drain stopper that is stuck?

Pull up on the toe-touch bathtub drain stopper, placing it in the open position. Use an old rag to help grip the stopper if you have difficulty pulling up on the stuck stopper. Turn the stopper counterclockwise to unscrew the stopper from the drain body.

How do you unclog a bathtub drain full of hair?

How to Unclog a Bathtub Drain Using Baking Soda and Vinegar

1. Remove the strainer and the stopper.
2. Use a washcloth or paper towel to remove any excess hair or soap scum that has accumulated around the strainer and the stopper.
3. Boil a pot of water and carefully pour the water down the clogged bathtub drain.