Tracker Medic

Home / general

How do I setup my DIR 615 wireless router?

Mia Phillips |
Configuration for D-Link DIR-615
  1. Visit the router's IP address () in a new browser window.
  2. Enter the router password.
  3. Click on the Manual Internet Connection Setup button at the bottom.
  4. Enter the OpenDNS addresses in Primary DNS Server and Secondary DNS Server fields.
  5. Click Save Settings button at the top.

.

Also asked, how do I setup my Dlink wireless router?

Follow these steps to set up your D-Link Router –

  1. Power on your D-Link Router.
  2. Connect your PC to the router using an Ethernet Cable or WiFi.
  3. A login page will appear.
  4. Now, you can configure and set up your router using the Internet Connection Setup Wizard.
  5. Under Wireless Setup enter SSID (WiFi Name) and Key (Password).

One may also ask, how do I configure my router? About This Article

  1. Connect the router to the modem.
  2. Connect the computer to the router.
  3. Go to the router's default IP address in a browser.
  4. Sign in with the default username and password.
  5. Open the Wireless settings.
  6. Name your network.
  7. Set an encryption type and passphrase.
  8. Save your changes.

Also Know, how do I reset my DIR 615 router?

To reset the D-Link DIR-615 to its default settings, you have to do the following steps:

  1. Put router into operation.
  2. Press RESET button and hold for at least 10 seconds.
  3. Restart of the device is automatically executed.
  4. Default settings have been restored.

How do you find the IP address of a router?

Find your Router's IP address on Android Go to Settings > WLAN. Click the details icon. Then you could find your Router's IP address show as Gateway.

Related Question Answers

Why can't I log into my DLink router?

Fix can't Login to DLink Router: Make sure you're using the correct IP address for the router, as well as the correct port (some use 8080 instead of the standard port 80). The wireless settings may not be configured correctly and wireless access to the admin interface may be disabled.

What is the IP address of my DLink router?

The default IP is 192.168. 0.1 or click here Step 2: You should be taken to a D-Link login page. By default, the username is admin and there is no password.

How do I restore my router after factory reset?

Click the Administration tab then click on the Factory Defaults sub-tab. Step 3: Under the Factory Defaults section, click on the Restore Factory Defaults button. After resetting the router to its default settings, reconfigure it according to your Internet service.

How do I setup my Dlink router without a computer?

How to set up a Wi-Fi router without a computer
  1. 1) Plug in your router, and wait a minute or two for it to completely power up.
  2. 2) Using your smartphone/tablet, turn on your Wi-Fi and connect to your router's network.
  3. 3) You will be prompted to provide a password.
  4. 4) When connected, open your device's browser.

How do I setup my Dlink router after reset?

To reset your D-Link router:
  1. With the power on (Power LED on front panel should be lit green), use the pointed end of a paper clip to press and hold the Reset button for 10 seconds.
  2. Release the Reset button.
  3. Wait 15 seconds before resuming setup.

How can I reset my Dlink router password?

Resetting your D-Link® router's Wi-Fi password is easy:
  1. Type your router's IP address —192.168.
  2. At the login screen, select “Admin” from the drop down menu and enter your admin password.
  3. Once you access the Web configuration screen, click “Setup” in the top menu.

What is the default password for D Link DIR 615?

Every version of the D-Link DIR-615 router has a default username of Admin and, like most D-Link routers, no default password. The default IP address used to access the DIR-615 router is 192.168. 0.1.

How do I reset my Dlink DIR 825 router?

Reset the Dlink DIR-825 Take an unwound paperclip or similar object and press down on the reset button for about 10 seconds to begin the reset process. Some routers will only reboot if you don't hold the reset button down for long enough. Be aware of that when trying to log in using the defaults.

How do I reset my Dlink 600m router?

Reset the Dlink DIR-600M While the router is on take the end of a paperclip and press down on the reset button for about 10 seconds to start the reset process. It's important that you hold the reset button down for the entire amount of time.

How do I reset my Dlink 605l router?

To reset the D-Link DIR-605L to its default settings, you have to do the following steps:
  1. Turn on router.
  2. Press RESET button for at least 10 seconds.
  3. Device is automatically restarted.
  4. Restoration of standard settings is finished.

How do I reset my Dlink DIR 816 router?

Step 1: With the unit on, place a paper clip into the hole on the back/bottom of the unit labeled Reset. Step 2: Hold the paper clip down for 10 seconds and release. Step 3: The lights on the front of the router should start to flash (The power LED may go off or turn orange) and then the device will reboot.

How do I reset my Dlink DIR 853?

D-Link Routers Help Try hard resetting your router login. To do this, press and hold the small black button found at the back your router for around 10 seconds. This will reset your router to the factory settings.

How do I configure my router as an access point?

Simply connect the access point to one of the ports of your existing wired/wireless router then configure the access point's wireless settings.
  1. Open the access point's web-based setup page by entering the default IP Address “192.168.
  2. On the web-based setup page, click on Wireless.
  3. Enter the Network Name (SSID).

How do I setup a static IP address on my Dlink router?

Here's how to do it in five easy steps:
  1. Fire up your D-Link router's Web configuration screen and click on its Setup tab.
  2. From there, click on Network Settings on the sidebar.
  3. Scroll down to the Add DHCP Reservation section, check the Enable box and add your device's name.
  4. Add your device's IP Address and MAC Address.

How do I secure my Dlink router?

How to Make My D-Link Wireless Router Secure
  1. Open your Web browser.
  2. Type "admin" (without quotes) into the "User Name" to log in with the default login.
  3. Click the "Wireless Settings" tab.
  4. Click the drop-down arrow of the field next to "Security Mode."
  5. Select the security mode you want to apply to the router.
  6. Type a passphrase into the "Passphrase" field.

How do I set up a second Dlink router?

How to Connect Two D-Link Routers
  1. Attach your computer directly to the second router using an Ethernet cable.
  2. Open your computer's Web browser and enter "" in the address bar.
  3. Enter "admin" for the username and leave the password blank when then login window appears.
  4. Click "Network Settings" on the left of the "Setup" tab.

How do I setup my D Link n300 wireless router?

How to configure the wireless network settings on D-Link GO-RT-N300 router?
  1. Step 1 – Open the web browser the IP of the D-Link GO-RT-N300 router ()
  2. Step 2 – In the Username field type Admin.
  3. Step 3 – Click on the Wireless option.
  4. Step 4 – In Wireless Basics, you must set the following:
  5. Wireless Network.

How do I make my Dlink router a repeater?

How to setup Repeater mode on my router? Step 1: Open your Internet browser and enter http://dlinkrouter, http://dlinkrouter.local, or into the address bar. Step 2: The default username is Admin. Enter your administrator password.

What is router admin password?

NOTE: Resetting your router to its default factory settings will also reset your router's password. The router's default password is “admin” as for the username, just leave the field blank.

You Might Also Like