How do I replace my Delta Faucet parts?

There are a number of ways to purchase genuine Delta Faucet Replacement Parts.

Enter your zip code in our Dealer Locator to locate a dealer near you.
Call 1-800-345-DELTA (3358)
e-mail us for assistance.
To order parts online, click here.
Contact your professionally licensed plumber or Delta showroom.

Then, does Delta Faucet have lifetime warranty?

The Delta Faucet Lifetime Limited Warranty is one of the most extensive in the industry. It covers manufacturer defects in faucet function as well as faucet finish, provided you are the original purchaser. Labor charges and/or damage incurred during installation, repair or replacement are excluded.

Also Know, how do I get my free Delta Faucet parts? Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use and service. Replacement parts may be obtained by calling 1 800 345 DELTA (3358) or by writing: Delta Faucet Company Product Service 55 E.

Hereof, where is the part number on a Delta faucet?

The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet.

How long do Delta cartridges last?

Delta faucets have always had well-engineered internal parts. It is not uncommon for a faucet cartridge to last 10 or even 15 years before the faucet starts to drip.

How much does a plumber charge to fix a leaky faucet?

The national average cost to repair a dripping faucet is $65–$150, but the cost may be higher, depending on the nature and cause of the leak. Fortunately, this is a pretty easy fix. Faucets that drip at the spout may be fixable by tightening a stem screw or replacing a corroded valve seat or worn out washer.

How do I contact Delta Faucet?

You may call our 1-800-345-DELTA (3358) Customer Service number and speak with a representative.

Do Delta faucets have cartridges?

Single Handle Cartridges. Cartridges are the most common repair part used for fixing leaks and flow issues. Select your matching cartridge here and get your faucet working like brand new!

Are all Delta shower valves the same?

With one Delta Shower Valve you can install any of their Shower Faucet Trim Kits. The same valve can be used for a Shower only Installation and a Tub Shower Combination Installation. This is because with Delta Shower Valves it is the Trim Kit that determines the function, not the Valve.

Where do I find my faucet model number?

Identifying Your Faucet Model

The model number is printed on a tag that is attached to the cold water supply line of the faucet.
The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet.
The model number, or part number, is typically preceded by "P/N."
In the image above, the model number is 6227-V3-AA.

How do I claim my Delta Faucet warranty?

If you have any questions or concerns regarding our warranty plan, please view our Warranty FAQ, email us, or call 1-800-345-DELTA (3358). All parts and finishes of the Delta® faucet are warranted to the original consumer purchaser to be free from defects in material & workmanship for a period of 5 years.

How do I identify my faucet cartridge?

For sink faucets, look at the front of the spout. The logo may also be on the base of the spout, where it meets the sink, either on the front or the back. For shower faucets, look on the round plate (escutcheon) behind the handle, on the handle itself, or perhaps on the actual valve behind the wall.

What is Delta Faucet warranty?

All parts and finishes of the Delta® faucet are warranted to the original consumer purchaser to be free from defects in material & workmanship for a period of 5 years. Delta Faucet Company recommends using a professional plumber for all installation & repair.

How do you remove a Delta Faucet handle?

How to Remove Handles From a Delta Faucet

Turn off the water at the shut off valve underneath the kitchen sink.
Use a 1/8 Allen Wrench to remove the set screw that holds the handle in place.
Slide the handle off and set it aside.
Remove the Chrome domed housing with a channel locks.
Remove the plastic white shield which lies on top of the ball valve.

How do you fix a leaky Delta single handle faucet?

Fixing a Dripping Delta Single Handle Kitchen Faucet

FIXING A DRIPPING DELTA SINGLE HANDLE KITCHEN FAUCET.
STEP 1: SHUT OFF THE COLD AND HOT WATER VALVES UNDER THE SINK.
STEP 2: REMOVE THE BUTTON AND SCREW THAT HOLDS THE HANDLE IN PLACE.
STEP 3: REMOVE THE CAP.
STEP 4: USE THE WRENCH TO REMOVE THE CARTRIDGE RETAINING RING.

What are the parts of a faucet called?

Kitchen Faucet Parts Explained

Gaskets. Gaskets (or O-rings) make sure that the faucet's joints are watertight.
Escutcheons and Flanges. These are installed behind or under your faucet in order to cover the hole for the pipe or valve.
Aerators and Adaptors.
Handles, Levers and Controls.
Faucet Stems.
Washers.
Stem Screws.

How do you fix a leaky 3 handle shower faucet?

Although it looks complicated, you can repair a leaking three-handle tub and shower faucet in just a few steps.

Turn off the water supply to the faucet.
Remove the screws from the hot and cold water handles.
Insert a tub-and-shower valve socket wrench on the faucet stem and turn it counterclockwise.

How do I identify my Delta shower faucet?

Identify the main features of the faucet. In terms of handles, Delta has lever handles, single-round handles and double-handle shower faucets. Identifying the type of finish helps as well which can either be chrome of brushed metal. The material the handle is made of matters to and can either be clear plastic or metal.

What kitchen faucets have lifetime warranty?

Delta(7)
MOEN(62)
Glacier Bay(71)
American Standard(40)
KRAUS(1)
HOUZER(113)
GROHE(48)
EZ-FLO(44)

How do you stop a Delta tub faucet from dripping?

Loosen an adjustment ring to make a stem easy to operate, then turn off water and open faucet all way in mid hot/cold range. If the water leaks from the stem, forcibly tighten a ring until leak stops.

Are Delta Faucets made in USA?

Founded and headquartered in the heart of the Midwest, USA. Delta Faucet is also proud to operate multiple manufacturing facilities in the U.S. and employ more than 1,300 U.S.-based employees across the country. A plumbing company that stands beside—and inside—the USA. Another way Delta is more than just a faucet.

How do I return a Delta faucet?

Before returning a product to us, call 1-800-345-DELTA (3358) to verify that the faucet or parts need to be returned. Depending on your circumstances, you will be asked to discard your old faucet or faucet parts or return it/them to us. If you do need to return them, you will be given a mailing address at that time.

Does Moen faucets have a lifetime warranty?

Warranty for Moen Branded Bath Accessories Limited Lifetime Warranty - If this product fails due to a defect in materials or workmanship at any time during the life of the product, Moen will replace it free of charge, postage-paid. Simply contact Moen at 1-800-BUY-MOEN for replacement information.

Tracker Medic