How do I connect my phone to AfterShokz?

How do I pair Air to multiple devices?

Start with your headphones turned off.
Enter pairing mode by pressing and holding the volume+ button for 5-7 seconds, until the LED light flashes red and blue.
Press and hold the multifunction button and volume+ button for 2-3 seconds.
Pair first device.
Turn your headphones off.

Hereof, how do I connect Trekz titanium to my phone?

Press and hold the power button for 5 seconds to enter pairing mode. The LED indicator will flash blue and red repeatedly while in discovery. Enable the Bluetooth® settings on your device and select “Trekz Titanium by AfterShokz”. The LED indicator will turn blue once connected.

how do I connect my AfterShokz Aeropex? Enter pairing mode by pressing and holding volume+ for 5-7 seconds. Audrey will say “Welcome to AfterShokz.” Continue holding volume+ until the LED light flashes red and blue. Open your device's Bluetooth settings and select “Aeropex.” Audrey will say “Connected.” Your headphones should now be connected to your device.

Just so, how do I connect my phone to Trekz air?

Pairing Air is easy with these simple steps:

Start with your headphones off.
Enter pairing mode by pressing and holding the volume+ button for 5-7 seconds. How do you know when you're in pairing mode?
Open the Bluetooth settings on your smartphone or other device and select Air. Audrey will say "connected."

How do I turn on AfterShokz?

Enter pairing mode by pressing and holding the volume+ button for 5-7 seconds. Your headphones will turn on, and then the LED light will flash red and blue. Press and hold the multifunction button, volume+ button and volume- button simultaneously for 3-5 seconds. You'll hear beeps and/or feel vibrations.

What is multipoint pairing?

Multipoint pairing allows you to be connected to two devices at the same time. While you won't receive input from both devices at the same time, you'll be able to seamlessly transition from one device to the other.

How do I connect my AfterShokz to my android?

Enter pairing mode by pressing and holding the volume+ button for 5-7 seconds, until the LED light flashes red and blue. Press and hold the multifunction button and volume+ button for 2-3 seconds. Audrey says "Multipoint Enabled." Pair first device.

Are Trekz titanium waterproof?

Our headphones are durably designed for your active lifestyle and will reliably power through workouts and weather. They're nanotechnology coated to repel sweat and moisture; however, they're not waterproof and should not be submerged in water or left out in wet environments.

Do AfterShokz work with iPhone?

While Aftershokz can't switch easily between several devices, there's a key feature that needs to be talked about: multi-point support. The Trekz Titanium can support two devices at once, letting you use it with a Mac and iPhone, iPhone and iPad, and so on.

Where is the power button on Trekz titanium?

The power button is also the volume+ button. It is not the multifunction button located on the side transducer. Audrey will say “Welcome to Trekz Titanium,” indicating the headphones are on. If you want to turn the headphones off, press and hold the same button.

How do I set up titanium Trekz?

Press and hold the power button for 5 seconds to enter pairing mode. The LED indicator will flash blue and red repeatedly while in discovery. Enable the Bluetooth® settings on your device and select “Trekz Titanium by AfterShokz”. The LED indicator will turn blue once connected.

How do you pair two headphones?

To enable this feature:

Go to Settings > Connections > Bluetooth.
In Android Pie, tap Advanced.
Turn on the Dual Audio toggle switch.
To use Dual Audio, pair the phone with two speakers, two headphones, or one of each, and audio will stream to both.
If you add a third, the first paired device will be booted off.

How do you turn on a Trekz air?

Open your device's Bluetooth® menu and select “Trekz Air By AfterShokz.” Audrey says “Connected” and the LED light will flash blue one time. “Welcome to Trekz Air.” Power on Press and hold volume+ for 3 seconds. Power off “Power off” Press and hold volume+ for 3 seconds.

How do I pair tracks air?

Connect to TRACKS

Hold the power button to turn on TRACKS AIR.
You'll hear the “TRACKS AIR is ready to pair” followed by a heartbeat.
Now go to the settings on your Android phone, tap Apps > Settings > Bluetooth.
Turn ON Bluetooth.
Press the scan button, it will look for visible devices.

How do Trekz air work?

Aftershokz Trekz Air. Headphones that disappear on your head and let you hear everything. This small band wraps around the back of your head and delivers sound through unique pads pressed against your skull.

How long does it take to charge AfterShokz?

1.5 - 2 hours

How do AfterShokz work?

THE POWER Unlike traditional headphones that use speakers to transmit sound, AfterShokz uses patented bone conduction technology. Transducers send mini vibrations through the cheekbones and deliver sound directly to the inner ear, bypassing the eardrum.

How do I reset my AfterShokz headphones?

To manually reset your headphones:

Start with your headphones off.
Enter pairing mode by pressing and holding the volume+ button for 5-7 seconds.
Press and hold the multifunction button, volume+ button and volume- button simultaneously for 3-5 seconds.
Turn your headphones off.

How do you charge Trekz air?

Insert the micro USB end into the micro USB charging port on the headphones, located beneath the protective flap, next to the volume+ button. Insert the standard USB end of the charger into a USB port on a computer, wall adapter, or other charger. Please ensure the charger does not exceed 5.25 amp or 5 volts.

How do you connect Trekz titanium to Mac?

How do I reset my AfterShokz Aeropex?

To manually reset your headphones:

Start with your headphones powered off.
Enter pairing mode by pressing and holding the volume+ button for 5-7 seconds.
Press and hold the multifunction button, volume+ button and volume- button simultaneously for 3-5 seconds.
Turn your headphones off.

How do I charge my AfterShokz air?

You can charge your headphones with the provided micro USB charger. Insert the micro USB end into the micro USB charging port on the headphones, located beneath the protective flap, next to the volume+ button. Insert the standard USB end of the charger into a USB port on a computer, wall adapter, or other charger.

How do I pair my AfterShokz Bluez 2?

How do I pair Bluez 2S to my device?

Start with your headphones off.
Enter pairing mode by pressing and holding the power button for 5-7 seconds, until the LED light flashes red and blue.
Open your device's Bluetooth settings and select the Bluez 2S. Audrey will say “Connected.”

How do I turn off AfterShokz Trekz air?

Audrey says “Welcome to Trekz Air.”

How do I reset the headphones?

Start with your headphones off.
Enter pairing mode by pressing and holding the volume+ button for 5-7 seconds.
Press and hold the multifunction button, volume+ button and volume- button simultaneously for 3-5 seconds.
Turn your headphones off.

Tracker Medic