Give the valve a quarter turn. NOTE: Once you have shut off the gas at the meter, do not try to turn it back on yourself. If the gas service shutoff valve is closed, PG&E or another qualified professional should perform a safety inspection before the gas service is restored and appliance pilots are relit..
Similarly, can I turn my gas back on myself?
Once the valve is turned off, do not turn it back on by yourself. It must be turned on by a gas company technician. The gas company will likely perform a pressure test on the system and relight all pilot lights in the house as part of turning the gas back on.
Subsequently, question is, how does the gas company turn on the gas? The gas company turns on the gas by placing an adjustable pipe wrench onto the tang and moving it from its horizontal (closed) position a quarter turn (usually either direction), so that the tang is now vertical. Turning off the gas is as easy as turning the tang with the wrench back to the horizontal position.
Beside this, how do I turn off the gas to my dryer?
Turn off the dryer's gas supply. You can do this by turning off the small valve on the dryer line or the main valve that supplies gas to the whole house. Disconnect the dryer from the gas line by unscrewing the flex hose from the line only. Seal the gas line using a gas line cap.
How long does it take gas to dissipate?
About 5 minutes is plenty. Just make sure to read up on how many threads the gas lines should be.
Related Question Answers
How do you turn off the main gas?
There is a shut-off valve running parallel with the pipe, usually located about 6 to 8 inches above the ground. Take a 12-inch or larger adjustable wrench, and turn the valve 1/4 turn in either direction, until the valve is crosswise to the pipe.What do I do if my gas is shut off?
Gas shut off - Locate your main gas service shutoff valve.
- With a wrench, turn the lever in either direction until it is crosswise to the pipe.
- Once the gas is turned off, leave it off.
- Call PSE at 1-888-225-5773 and we will turn it back on, check the system and relight your appliances.
What does a gas meter look like?
Typical natural gas meters look a lot like electricity meters but with only four dials (some can have up to six). Dials one and three spin counter clockwise, while dials two and four spin clockwise. The dials spin from the force of the moving gas in the pipe and spin faster as the flow increases.Where is the gas shut off in your house?
Houses with natural gas have a main shutoff valve (Fig. A) located just before the gas meter. This valve, often called the street-side valve, is normally a rectangular nub (Photo 1). When the long side of the nub or handle is parallel to the incoming gas line, it's open and the gas is flowing.What happens if you cut the lock off your gas meter?
The danger is being sloppy when you cut the lock off and cutting the gas pipe as well, causing an explosion. Even if you cut the lock off, and turn the valve to the ON position, the gas will still be blocked by a solid washer (disc) placed in the inlet or outlet sleeve coupling located next to the meter body.What does S mean on a gas valve?
Definition of Furnace Gas Valve A furnace gas valve is a component of your furnace's fuel system. The furnace gas valve opens and closes, which allows the flow of gas to the pilot light and burner(s). There are also gas valves located within gas-powered hot water systems or fireplaces.Which way is on for a gas valve?
The gas valve is on when it's parallel to the incoming gas line. To stop the flow of gas, the valve needs to be turned a quarter-turn so that it is perpendicular to the gas line. Once completed, the gas line is closed and the flow of gas is stopped.How do I know if a valve is open or closed?
When the handle of a ball valve is parallel to the valve or pipe, it's open. When it's perpendicular, it's closed. This makes it easy know if a ball valve is open or closed, just by looking at it. The ball valve below is in the open position.Where is my master water valve?
This valve is usually in the basement or on an outside wall in a utility area of the house. The main shutoff valve allows a full flow of water through the pipe when it's open. Turning off this valve (by turning it clockwise) cuts off the water supply to the entire house.How do you light a pilot light after gas is off?
Light a match and hold it directly beneath the tube in the pilot opening. Press and hold the pilot control knob down until the flame lights. Remove the match, but continue to hold the knob down for 30 seconds before releasing it. If the pilot light flame does not stay lit after releasing the knob, repeat the process.What is a gas ball valve?
Gas cocks are shut-off ball type valves commonly used in installation of residential and commercial appliances and heating equipment such as gas stoves, fireplaces, water heaters, boilers, furnaces, etc. They are compatible with natural, manufactured, liquefied petroleum gas (LPG or propane) or air mixtures of such.What does O and S mean on water valve?
Lever type water valves such as the one in this photo are on or "open" permitting water to flow when the valve handle is parallel or "in line with" the water piping, and the valve is "off" or "closed" or "shut" when the valve is at right angles to the piping. 
