Can you cut your own granite countertops?

Granite is a hard rock that's tough to cut through, but you don't need to be a stonemason to cut it yourself. With a circular saw and a diamond-cut blade, you can make clean and precise cuts. As long as you take the right precautions, you can turn cutting granite into a safe and enjoyable DIY project.

.

Likewise, how much does it cost to cut granite?

On average, it is $300 to $500 to cut the stone and polish the edge. Your rate will depend on your area, how soft or hard the stone is and the type of edge you want.

One may also ask, what tools do I need to cut granite countertops? To cut granite countertops, you'll need a circular saw equipped with a continuous diamond coated cutting blade. Edges can be smoothed or rounded with a grinder equipped with a diamond coated grinding wheel. Diamond wheels and blades can generally be found in the tool section of most home centers.

Also question is, how do you cut an existing granite countertop?

CUTTING A GRANITE SLAB

1. Choose either a standard circular saw or a wet-cut circular saw to cut granite.
2. Position the granite slab on a sturdy work surface, and use C-clamps, attaching one every couple of feet along the sides of the slab, to secure it tightly.

How do you cut granite by hand?

Place the chisel and mallet aside and insert the blade of your diamond-tipped handsaw into the groove you made with your chisel. Cut the granite with a sawing motion until you have successfully cut the entire section, wetting the blade as desired to cut down on dust accumulation.

Related Question Answers

Can Home Depot cut granite?

The stores have no ability to cut granite. You should try a local stone counter top fabricator. While Adam444 is correct that no store provides the service of cutting granite, but if it is in tile form, you can rent a tile saw. Just make sure your nearest Home Depot has a Tool Rental Center.

Is it difficult to cut granite?

Granite is one of the most difficult rocks to cut because it is so hard. Most saw blades will not be equipped to cut granite without damaging them. Fit your saw with a diamond-cut blade for the sake of precision and safety. Position your circular saw over the granite.

Is it OK to cut on granite countertop?

So while you can cut and chop directly on your granite surface, unless you want to replace your lovely Laguiole knives on a regular basis, your best bet is to use a cutting board. A luxury of having a granite countertop is that, if you're in a hurry, you can cut up an apple right on the surface.

What color granite is cheapest?

You'll typically find that tan and black granite slabs are the least expensive, and that white granite tends to be higher in cost.

How do you redo a countertop without replacing it?

13 Ways to Transform Your Countertops Without Replacing Them

1. Before you replace your dingy countertops
2. Lay marble tiles on top of your counter.
3. Get a marble-style look by layering concrete.
4. Paint them to look like granite.
5. Give them the brown paper bag treatment.
6. Replace countertops with smooth concrete.
7. Or coat them with a rough concrete cover.
8. Change the color with tinted cement.

What kind of saw do I need to cut granite?

A wet tile saw and a circular saw with a dry-cut segmented diamond blade will cover all your cutting needs for granite tile or a slab. A wet saw should be used for thick granite. Always use a sharpened diamond blade to safely and cleanly cut through granite.

What is a cheaper alternative to granite countertops?

Cheap Kitchen Countertop Alternatives

Material	Cheap to Expensive (Per Square Foot)*
Granite	$40-$100
Marble/Quartz/Engineered Stone	$50-$90
Wood	$50-$100
Soapstone	$50-$100

Can you cut granite with a jigsaw?

Diamond Grit Jigsaw Blade With a 3 1/4-inch diamond-grit blade, you can cut through porcelain, tile, slate, limestone and even granite tiles, provided that the tiles are not thicker than 1/2 inch.

Can you change a sink in a granite countertop?

The short answer is yes it can be replaced. However, I do recommend having a granite contractor do the replacement. The adhesive used to hold the sinks under the top is very strong once adhered. Also, the granite may have to be cut and polished to line up with the new sink properly.

Can you change granite countertop edge?

After many years in the countertop industry, we've come across many homeowners asking if their granite countertop can be cut or modified to fit their new cooktop, fridge or new sink. Surprisingly, the answer is yes, this can be achieved, with the help from Surface Link of course!

How thin can you get granite?

Consider, for example, that thin granite tiles may be approximately 3/8-inch thick while the typical kitchen countertops may be between ¾ and 1 ¼ inches thick. The thinner tiles may be more prone to cracking, if something drops on them, than the thicker slabs.

Can you change out an undermount sink?

Although undermount sinks seem to defy gravity, they are only slightly different to install than topmount sinks. Turn off the water supply and disconnect the plumbing before replacing the sink or hire a plumber to do that for you.

What can you do with old granite countertops?

Donate your old counter. If your stone is still in good shape, consider donating it to Habitat for Humanity or a similar charity. Because Habitat for Humanity builds homes based on donations they can use your old granite countertop. Plus, donating goods like this can reduce your tax bill.

Does Home Depot cut granite?

Granite it is one of the most difficult materials to cut. Your local Home Depot will have saw blades made to cut through granite, along with circular saws and other granite-cutting tools for purchase or rent.

How do you polish a granite sink?

To clean a granite sink, start by wiping down the sink using a non-abrasive scrubbing pad dampened with hot water and mild dish soap. Then, rinse the sink with clean water or wipe it with a damp sponge. Next, dry the sink using a soft cloth, like a microfiber towel, to ensure that you don't scratch the granite surface.

Can I cut granite with an angle grinder?

An angle grinder is better than a saw at trimming granite or making cuts that do not go through the entire slab. Choose an angle grinder equipped with a dry cut diamond wheel, which is strong enough to cut through stone. Hold the granite slab on a flat surface while using the angle grinder.

Can you cut granite with a hacksaw?

One alternative to cutting stone tile with a wet saw is to make cuts using a manual hacksaw. Choose a hacksaw with tungsten carbide teeth, which are better equipped to cut through hard stone than traditional steel blades.

How do you move a granite countertop?

It's important to always carry the countertops in a vertical position, never horizontally flat, to avoid cracking or breaking the stone. To transport granite slabs, carry them on edge in an A-frame rack, the way glass is carried. If needed, you can make a simple rack from 2x4s.